MBRAUN IT Labmaster 100 LM Laboratory Inert Gas Air-Free Glovebox Workstation With Pedal Controller PPM O2
Used, see photos
Some functions have been tested and work. Regeneration cycles work (solenoids all click when settings are rotated through): heating, purging, evacuation, and cooling functions. Blower circulator fan works, we just rebuilt the blower so that it has new bearings and rotor. Light fixture works. High and low pressure set points work. The catalyst was last replaced in 2020 (it at least needs a regen cycle if not full catalyst replacement)- it has been kept sealed with the butterfly valves on the catalyst chamber, but it is unknown if those are leak-tight. The system has not been fully tested or leak-checked since we do not have pure N2 at our facility. System has been thoroughly cleaned. Has two KF electrical power port feedthroughs - one runs the blower and one is for auxiliary power for any systems that you may want to run in the box itself (centrifuges, sonicators, lights, etc). The pressure gauge to the small antechamber is stuck and will either need to be replaced or will need some cleaning and repair.
System will be partly disassembled for shipping (light will be removed and the pressure gauges too).
It is an old box, it was originally installed in 1992 but very mechanically simple and easy to work on.
Due to large size and weight, this glove box will need to be shipped via freight. Buyer is responsible for all freight shipping charges.
